|
Sliding Door Fittings - Flush
|
Sliding Door Fittings - Flush
- Precision roller system has good load bearing and life.
- Has special guides and catches to secure the door.
- Special flush fittings to conceal gaps
- Load capacity - 125 kgs.
Specifications
| Item | Code No. | Max. Load Kgs. | Length Mtrs | Finish |
| Sliding Fittings | SDF 125 FM | 125 | -- | Zinc White |
| Aluminium Section (125 kgs.) | SDF AS 125M 2 | 125 | 2.44 | Anodized Silver |
| SDF AS 125M 3 | 3.66 | |||
| Wall Mounting Bracket | SDF WB | -- | -- | Zinc White |
Fitting Instructions
- Flush model is provided with channels (2 nos.) which are concealed in grooves 21 x 21mm at top of the door to have minimum gap. (Ref. Fig. 1)
- By removing the flush cover in the channel the inner bracket slides out into which the M8 bolts and nuts are fastened. After adjusting the height the cover is replaced. (Ref. Fig 1.)
- The bottom guides (2 nos.) are fitted on the floor. The groove required in the door is 9mm wide and 12mm deep (Ref. Fig.2)
- The catch (2 no’s) is fitted in the aluminum section at both ends and can be adjusted for pressure. (Ref. Fig. 3)
- Optional wall mounting brackets are available. This is to be fitted every 600mm on aluminum section (Ref. Fig. 4).
Packing Chart
| Item | Item Code | Size (mm) | Inner Packing (Kgs.) | Outer Packing (Kgs.) | ||
| Qty | Weight | Qty | Weight | |||
| Flush - 125 | SDF-125FM | - | 1 set | 0.822 | - | - |
| Aluminium Section (125 ) | SDF-AS-125 M2 | - | - | - | 8 Nos | 11.52 |
| SDF-AS-125 M3 | - | - | - | 8 Nos | 16.8 | |
| Wall Mounting Bracket | SDF-WB | - | 40 Sets | 4.64 | - | - |