Side gap of 15.5mm is required and acts as side panel of drawer (Fig.1).
Eccentric Cam for front facia height adjustment provided in 86 mm and 125 mm height Full Panels (Ref. Fig 2)
25.4mm clearance from top edge of drawer required to tilt and remove drawer(Ref. Fig.2)
Fixed slide should be set by 2mm for 'Auto-Closing' (Fig. 2).
Screws should be recessed to avoid fouling.
Fixed slides should be fitted parallel and at equal heights to each other.
Insert the Rear panel onto the Side panels through the key slot provided in the side panels (Ref. Fig.3).
Place the bottom flap through the track provided in the Side panels and fix the front facia with the Bracket and insert the unit onto fixed slides which are fitted internal sides of cabinet (Ref. Fig.4).