Mirror Holder

Mirror Holder

  • Ergonomically designed to enable easy installation of mirror without frame and no drilling on the mirror required.
  • Made out of SS 304.
  • Special PVC packing provided to protect the glass.
  • Can be used with mirror thickness from 4mm to 8mm.
  • A pair of bottom holder can withstand approximately 10 kgs. More holders can be used depending upon application.
  • Stainless steel screw provided.

 

Mirror Holder

Mirror Holder
 

  • Ergonomically designed to enable easy installation of mirror without frame and no drilling on the mirror required.
  • Made out of SS 304.
  • Special PVC packing provided to protect the glass.
  • Can be used with mirror thickness from 4mm to 8mm.
  • A pair of bottom holder can withstand approximately 10 kgs. More holders can be used depending upon application.
  • Stainless steel screw provided.

 

Specifications
Code No Finish
MH1 SS304

 

 

 

 

 

 

Fitting Instructions
  1. Screw both the bottom holders as per the desired width of the mirror and both the bottom holders should be at the same height as shown in Fig.1.
  2. Screw both the top holders in such a way that the Internal Dimension ‘A’ should be 2 to 3mm less than the height of the mirror as shown in Fig.2.
  3. Insert mirror into top spring loaded holders and lift slightly up and then rest it safely into the bottom holders as shown in Fig.3.

 

Ebco Mirror Holder
Ebco Mirror Holder
Ebco Mirror Holder

 

Packing Chart
Item Item Code Size (mm) Inner Packing (Kgs.) Outer Packing (Kgs.)
Qty Weight  Qty Weight
Mirror Holder MH1 8 mm 50 sets 2.42 250 sets 12.2
Ebco - Furniture Fittings and Accessories © 2018
GLI